Showing posts with label Ma.k. Show all posts
Showing posts with label Ma.k. Show all posts

6/02/2019

Spaceship Kepler 1:2000 DIY - start the print!






After making the 3D draft, it's time to print the pieces!
Like a huge skewer, the various elements are crossed by a square section that allows the whole to be strengthened and at the same time automatically allows the perfect alignment of the elements.
As a matter of speed the printing was set with a frame thickness of 0.3 mm, even if the printing time remains very high, the printing time varies from 2 hours to 9 hours depending on the particular.
After having printed all the main pieces, it will be time to work the surfaces (sandpaper and putty)  to eliminate the typical steps that are formed with this type of printing.

Stay tuned people



Dopo la realizzazione della bozza 3D è ora di stampare i pezzi!
Come un enorme spiedino i vari elementi sono attraversati da un profilato di sezione quadrata che permette di dare maggiore robustezza all'insieme e contemporaneamente permette automaticamente il perfetto allineamento degli elementi.
Per una questione di velocità la stampa è stata settata con uno spessore di frame di 0,3 mm, anche se il tempo di stampa rimane altissimo, il tempo di stampa varia delle 2 ore alle 9 ore in base al particolare.
Successivamente aver stampato tutti i pezzi principali sarà la volta di lavorare le superfici (carta vetrata e stucco ) per eliminare i tipici gradini che si formano con questo tipo di stampa.

Rimanete sintonizzati gente

6/01/2019

Spaceship Kepler 1:2000 DIY

KEPLER II

Kleper is a generational ship, takes the idea from the fantastic world of Machine Krieger  ( Mr.Kow Yokoyama ), obviously it is the fruit of my imagination and my personal interpretation.
The Kepler spaceship, in the real world, is about 2200Mt long, and it is a ship without weapons, destined to move thousands of humans from the earth to the new planets, we are at the very beginning of the Ma.K. universe.
The scale model conceived in 3D will be printed in Fused Deposition Modeling (FDM), this for the larger parts, then we will go to the finishing and construction phase of the smaller parts.
It is a complex and long project even with large dimensions of the model, about 1.1 Mt.

 Stay tuned people

La Kleper è una nave generazionale e prende l'idea dal fantastico mondo di Machine Krieger ( di Mr. Kow Yokoyama ), ovviamente è frutto della mia fantasia e della mia personale interpretazione.
L' astronave Kepler, nel mondo reale, è lunga circa 2200Mt, è completamente priva di armamenti, destinata allo spostamento di migliaia di umani dalla terra ai nuovi pianeti, siamo proprio all'inizio temporale della storia dell'universo Ma.K. .
Il modello in scala è stato concepito totalmente in 3D e sarà stampato in Fused Deposition Modeling (FDM), questo almeno per le parti più grandi, successivamente si passerà alla fase di finitura e alla costruzione dei particolari più piccoli.
Si tratta di un progetto complesso e lungo anche dalle grandi dimensioni del modello, circa 1,1 Mt.

State sintonizzati gente



8/15/2011

Twister .... resumed work


Returning from the sea on a sunny day in August 15 bungalowsnow the last image with the most recent advances in the ..... time is very short and the work really long isalways! small. I havecreated a block where the shock absorbers 4-wheels ..... They of course stick to get the pair I made copies of the resin.


Small! ... but significant steps ..... who are filling the gapsVarious!

















8/06/2009

New Project Ma.k style

Sicuramente il periodo che seguirà fino a novembre 2009 mi troverà impegnato nella realizzazione della Libelle Dust, e sarà dura molto dura perchè il lavoro è tantissimo ma il tempo estremamente breve!
Comunque appena esaurito questo lavoro intendo partire nella realizzazione di un mezzo stile Ma.k con la possibilità di crearne un master per eseguirne delle copie per gli appassionati del genere.
Sarà un lavoro lungo ed ambizioso, un idea di partenza c'è ed è abbastanza ben definita, il genere sarà tipo il Ma.k "SAFS Gladiator" ma molto più pesante ed armato e magari con qualche zampa in più!!
La scala sarà sicuramente in 1/35 viste le dimensioni che prenderà e per favorire l'accostamento con tutto il mercato modellistico in 1/35.
Non è detto che possa avere un accostamento multiplo a più soggetti Sci-Fi e non necessariamente Ma.k, questo sarà a discrezione del modellista.

Prossimamente se riuscirò vi mostrerò il disegno del progetto......quindi rimanete sintonizzati!

Space Flea - Starship scale 1:35 ( WIP) 2°part

Another small step: I connected the two side cheeks and sealed with Magic Sculp, the various spaces were first filled with plasticard. ...